Showing 65–80 of 86 results

  • ICS-4200

    LOGIC BOARD FOR V3F ELEVATOR CONTROL PANEL

    Maximum 40 stops with extension card.

    (G+39 down collective / G+23 full collective)

    User configurable with LCD display & keyboard.

  • ICS-4600

    LOGIC BOARD V3F ELEVATOR CONTROL PANEL.

    Maximum 40 stops with extension card.

    (G+39 down collective / G+23 full collective).

    User configurable with LCD display & keyboard.

  • ICS-500

    Logic board for V3F ELEVATOR. Supply voltage requirement 12VAC/DC, 24VDC & 110VAC for safety. On board number of stops 8. Maximum 16 stops with extension card. -(G+15 down collective / G+10 full collective). Door operation MANUAL door & AUTO door. Speed support up to 1 m/s. Reed signals FLOOR REED & CABIN TOP REED as…

  • ICS-600

    LOGIC BOARD FOR V3F ELEVATOR CONTROL PANEL

    Maximum 16 stops with extension card.

    (G+15 down collective / G+10 full collective)

  • ICS-900

    LOGIC BOARD FOR V3F ELEVATOR CONTROL PANEL.

    Maximum 16 stops with extension card.

    (G+15 down collective )

  • IR RECEIVER

  • LB-800

  • PFR CARD (V3F ELEVATORS)

    • This PFR ( Phase Failure Relay ) is used only in the V3F Elevator Control Panel.
    • This Card has only three inputs that are R Phase, Y Phase & B Phase. Neutral is not required.

  • PFR(SINGLE SPEED ELEVATORS)

    • This PFR ( Phase Failure Relay ) is used only in Single Speed & Hydraulic Elevator Control Panel.
    • This Card has only three inputs that are R Phase, Y Phase & B Phase. Neutral is not required.

  • RLB-3003

    • Supply voltage for this card is 12VDC/24VDC as per requirement.
    • This card has two relays with their coil input connectors & both relays COM-NO contact output connectors.
    • Compact size design with removable connector input-output & mounting holes.

  • RN ARROW LOP

    • Supply voltage requirement 12VDC/24VDC as per customer requirement.
    • Single digit & double digit 1 inch 7 segments are used for the elevator floor Indicator.
    • Single 1 inch ( 5×7 ) DOT MATRIX module is used for showing elevator direction indication with the scrolling Arrow.
    • All 7 segment and arrow inputs are -ve (GND).

  • SER BIG DOT MATRIX COP

    • Supply voltage requirement 12VDC TO 24VDC.
    • Single digit & double digit 2 inch Dot Matrix are available in the same card.
    • This COP card communicates with SER-3500 & SER-3200 Logic board using two wires MODBUS communication.

  • SER DOT MATRIX LOP CARD

    • Supply voltage requirement 12VDC TO 24VDC.
    • This LOP card communicates with SER-3500 & SER-3200 Logic board using two wires MODBUS communication.
    • SER DOT MATRIX LOP Card having UP & DOWN Hall Call with Registration LED connector, So we can use them in FULL COLLECTIVE & DOWN COLLECTIVE mode.

  • SER TO 7 SEG CONVERTER

    • Supply voltage requirement 12VDC TO 24VDC.
    • This card converts our input Serial communication data to 7 Segment output data.

  • SER-3200

    Logic board for V3F ELEVATOR. Supply voltage requirement 24VDC & 110VAC for safety. Same logic board we can use for two types of control. -1) SEMI SERIAL CONTROL – Only car top board serial communication using Modbus with main Logic Board & Landing LOPs are parallel. -2) FULL SERIAL CONTROL – Both Car Top &…

  • SER-3500-V2

    SERIAL COMMUNICATION LOGIC BOARD FOR V3F ELEVATOR CONTROL PANEL

    Same logic board we can use for two types of control

    1) SEMI SERIAL CONTROL – Only car top board serial communication using Modbus with main Logic Board & Landing LOPs are parallel.

    2) FULL SERIAL CONTROL – Both Car Top & Landing LOP having serial communication using Serial Cartop board & Serial Landing cards.